Clamar4409's blog

Infrared Night Vision Illuminator

 

IR (InfraRed) Illumination Products can shed a whole new light on digital video recording in total darkness. Discounted CCTV offers several IR Illuminators in addition to the long range IR cameras for your low-light to no-light digital video security and surveillance applications.

The average digital video security and surveillance system consists of three major components; one or more cameras, a DVR, and one or more monitors. For this article, let's take a closer look at the digital video cameras and IR Illumination Devices.



1.) LTS-LTIR150


2.) LTS-LTIR100


3.) LTS-LTIR40


4.) LTS-LTIR360

 

LED beneath cabinet strip lights

Contractors can provide their business clientele not more than LED beneath cabinet lighting inside a variety of fixture types. LED not more than cabinet lighting has evolved towards the the boards that they now can produce lights characteristics equivalent to incandescent, xenon, and fluorescent assets. On the exact same time, the builder, contractor, or commercial lights designer is in no way minimal to a single option of beneath cabinet mild fixture kind. Customers with particular tastes may be accommodated in accordance to their preferences with no compromising technical overall performance or aesthetic results. Interior architecture could be completely matched with both normal or custom led under cabinet lights that compliment differentiating capabilities and mix seamlessly with the décor of their immediate surroundings.

LED beneath cabinet strip lights

Strip lights are considered the luxury form of undercabinet set alight furniture. LED linear strips feature a custom cut track that is intended to hide itself underneath the cabinet’s forward exterior. Up until recently, incandescent, xenon, or halogen festoon lamps provided slightly varied forms of white lights. Incandescent and halogen were used mostly to mild warm colors, and xenon was used extensively for cooler colors because of its slightly golden tone. LED undercabinet lighting has altered the boundaries of these near absolutes. Because LED’s can produce any color of mild now, including white, they might be adjusted to spectrally match whatever surface they are meant to illuminate.Because their slim design measures less than one inch, they are superb mild assets for any decorative show. Contractors routinely decorate bookshelves, antique cases, curio cabinets, and even ornamental furniture pieces with these custom-made, proprietary furniture. Because they require only 20% the electricity as general room lights, and because they are completely dimmable, many people 
simply turn them down for night lights effects rather than completely turning them off.

Not more than cabinet LED puck lights.

Puck lights have always been well loved as kitchen beneath cabinet lights and are also used in curio cabinets and very generous bookshelves. Although not less unobtrusive, and therefore less ornamental, than linear mild strips, LED puck lights still provide an elegant compliment to many environments. They could be used in a very wide selection of places because they vary so greatly in size. Their basic design, akin to that of a hockey puck, gives them their colloquial name. LED puck lights are regularly used for tandem lighting in a very series. Because of the power saving curb they supply towards the Spartan budget, more furniture and more set alight can still be produced at lower operating expense. Although not as sophisticated as linear strips, puck lights are nevertheless very well loved because they are easy to install and can be used in possibly functional or decorative under cabinet lighting.

Recessed LED beneath cabinet lights

Instead of simply attaching for the bottom of the shelf the way puck furniture install, recessed led not more than cabinet lights are mounted frankly into the shelf. They are therefore a fantastic deal more low profile and commonly preferable to normal pucks when aesthetics is a major concern. Because they must be installed by cold into the surface of the cabinet, make certain that your client absolutely wants recessed led lights under the cabinet prior to installation. Once installed, but, they cannot be removed without leaving a visible scar.

LED Rope lights

LED rope lights for beneath the cabinet mild is the simplest way to illuminate countertops and kitchen interiors. It works very well in smaller houses, townhomes, and apartment units where decoration without having extravagance represents the most sensible and cost effective means toward a better aesthetic. LED rope lights might be bought in all primary colors, as well as white, in very generous quantities for low prices. This is ideal for a builder working on small homes and condominiums looking to pass on savings to your first time buyer, who may or may not want to upgrade the lighting later, but who nevertheless will be pleased to see some sort of not more than cabinet lights when he or she first moves in. These lights are very easy to mount as well using plastic clips that attach them to cabinet under surfaces and shelving in displays and bookshelves.
If you have any questions about LED applications and characteristics, then contact us frankly to learn more information these energy saving, unique underneath cabinet lights furniture.

Do you recommend S Video and BNC or RCA Cables for VHS to DVD Dubbing

S-Video cables will deliver much better picture than composite (RCA) cables

Below is the technical explanation, but I'm speaking from first hand experience. RCA or BNC cables (more correctly known as composite cables, though everyone calls them RCA) deliver a significantly inferior picture. I can see color bands right in the center of my screen using RCA cables, whereas colors look much better and signal seems less susceptible to noise with S-Video and BNC cables. Make sure you use good S-Video cables, though, because I sometimes see a "herringbone" noise pattern on inferior cables. Don't bother with gold-plated connectors, they really don't improve the picture or the signal. But bottom line, if the VCR you plan to buy has an S-Video output, you should definitely use that rather than RCA for connecting to your DVD recorder or computer for dubbing. You'll still need RCA cables for the audio, though.

Here's the tech explanation:

Separate video, abbreviated S-Video and also known as Y/C (or erroneously, S-VHS and "super video") is an analog video signal that carries the video data as two separate signals (brightness and color), unlike composite video which carries the entire set of signals in one signal line. S-Video, as most commonly implemented, carries high-bandwidth 480i or 576i resolution video, i.e. standard definition video.It also has audio.

The luminance (Y; greyscale) signal and modulated chrominance (C; colour) (A; audio)information are carried on separate synchronized signal/ground pairs.

In composite video, the luminance signal is low-pass filtered to prevent crosstalk between high-frequency luminance information and the color subcarrier. S-Video separates the two, and detrimental low-pass filtering is unnecessary. This increases bandwidth for the luminance information, and also subdues the color crosstalk problem. The infamous dot crawl is eliminated. This means that S-Video leaves more information from the original video intact, thus having a much-improved image reproduction compared to composite video.

Due to the separation of the video into brightness and colour components, S-Video is sometimes considered a type of component video signal, although it is also the most inferior of them, quality-wise, being far surpassed by the more complex component video schemes (like RGB). What differentiates S-Video from these higher component video schemes is that S-Video carries the colour information as one signal. This means that the colours have to be encoded in some way, and as such NTSC, PAL and SECAM signals are all decidedly different through S-Video. Thus, for full compatibility the used devices not only have to be S-Video compatible but also compatible in terms of colour encoding.

Today, S-Video or BNC signals are generally connected using 4 pin mini-DIN connectors using a 75 ohm termination impedance. Apart from the impedance requirement, these cables are equivalent to regular mini-DIN cables (like Apple's ADB); these cables can be used for S-Video transfer if no other cable is available, but picture quality may not be as good. Due to the wide use of S-Video or BNC connections for DVD players, S-Video cables are fairly inexpensive compared to component or digital connector cables, and are routinely available in places where the higher-bandwidth cables are not.

The mini-DIN pins, being weak, sometimes bend. This can result in the loss of color, or other corruption (or loss) in the signal. A bent pin can be forced back into shape, but this carries the risk of further damage, or even the pin breaking off.

Before the mini-DIN plug became standard, S-Video signals were often carried through different types of plugs. For example, the Commodore 64 home computer of the 1980s, one of the first widely available devices to feature S-Video output, used an 8-pin DIN connector on the computer end and a pair of RCA and BNC plugs on the monitor end. The S-Video connector is the most common video-out connector on laptop computers, however many devices with S-Video outputs also have composite outputs.

S-Video and audio (mono) can be transferred through SCART connections as well. However, it was not part of the original SCART standard, and not every SCART-compatible device supports it for this reason. Also, S-Video and RCA to BNC are mutually exclusive through SCART, due to the S-Video implementation using the pins allocated for RGB. Most SCART-equipped televisions or VCRs (and almost all of the older ones) do not actually support S-Video, resulting in a black-and-white picture if such a connection is attempted, as only the luminance signal portion is usable. Generally, a black-and-white picture in itself can also be a sign of incompatible colour encoding--for example NTSC material viewed through a PAL-only device.

A hack exists to possibly attain color on devices that do not support S-Video through SCART. This is done via joining the pins 15 and 20 in the SCART connector (either directly or using a 470pF capacitor), and may not yield optimal results.

A similar hack also allows color. This connects the Y and C (3 and 4) pins on the S-Video connector.

S-Video is commonly used in USA, Canada, Australia, and Japan, found there on consumer TVs, DVD players, high-end video cassette recorders, Digital TV receivers, DVRs, and game consoles. Almost all TV-out connectors on graphics cards are S-Video, even in Europe, where the standard failed to make a significant impact due to the preference for the higher-quality RGB signal provided by SCART.

Because it is very simple to convert S-Video to composite signal (just the logical merging of the two through a filter capacitor is required), many electronics retailers offer converter adaptors for signal conversion. No conversion will improve image quality, but will allow connecting to otherwise-incompatible devices. Converting composite signal to S-Video is a little harder.

Due to a lack of bandwidth, S-Video or RCA to BNC connections are generally not considered suitable for high-definition video signals. As a result, HD sources are generally connected to a monitor by way of analog component video or wideband digital methods (usually HDMI or DVI).

The situation with VCRs is a bit unusual; the common S-Video connector was designed for Super VHS VCRs as a high-bandwidth video connection, and has been used for the same purpose on a great number of other consumer devices, coming into greatest prominence with the rise of the DVD format. Many digital, Hi-8, and S-VHS-C camcorders support S-Video out as well, but standard VHS VCRs do not put out a high enough resolution signal to saturate an S-Video connection, and therefore most such units, even those in combination units with DVD players (which commonly use S-Video or component outputs), require the output from the VHS deck to go through a composite video or RF connection.

Connectors for BNC to RCA and RCA to BNC are availble at Discounted CCTV 

G4-HD-E Surveillance System CCTV DVR

Hi Definition DVR
The G4 HD-E CCTV DVR is a business class digital video recorder offering enterprise class features, which puts in into a class of its own. The G4 HD-E utilizes H.264 hardware compression, which is the same as our popular JS series DVRs. The unit has HDMI, VGA and composite monitor outputs, which can all be used simultaneously.

HDMI and VGA outputs can support resolutions as high as 1280 x 1024, 1280 x 720 and 1024 x 768 for live viewing. The G4 HD-E can record real-time video at CIF resolution on every channel and up to four audio recorded channels, two on the 8-Channel and 16-Channel units, at real-time at full D1 resolution. This can be utilized for a high priority camera such as a cash register or main entrance.

The G4 HD-E CCTV DVR offers network sub-streaming, enabling you to configure just the network functionality to your assigned upload speed without degrading the record quality. This feature was previously available only in our top end enterprise class units. The compact form factor allows installations in virtually any environment.

Included with every unit is a new and improved version of Client Software, which will also be compatible with our complete line of JS series DVRs. You are not limited to using the Client Software however, because this unit can also be accessed using the embedded Internet Explorer feature. Considering all these features; HDMI, network sub streaming, multiple hi definition main monitor outputs at a price that can’t be beat, you won’t find another DVR that compares.

MODELS G4HDE-4 Base 4ch unit w/o HDD
G4-HDE-8 Base 8ch unit w/o HDD
G4-HDE-16 Base 16ch unit w/o HDD
GENERAL

Video Inputs 4,8,16 inputs, BNC1.0Vp-p, 75.. unbalanced
Video Outputs 1 Channel TV output, BNC
1 VGA
HDMI 720p
Audio Inputs 4/8/2 channel, BNC, 200-2800mV, 30KĦ
Audio Outputs 1 Channel, BNC, 200-3000mv 5 KĦ
Audio Compression G.711
Video Compression H.264
Preview Resolution NTSC: 1280x1024, 1024x768,1280x720
Compression
Resolution
NTSC: 352 x 240(CIF)
NTSC: 176 x 120(QCIF)
Color 16.7 Million
Stream Type Video or Video/Audio Synced
Bit Rate 32kbps ~ 2Mbps (user-defined), variable
Recording Frame Rate 4ch: 120 frames/sec
8ch: 240 frames/sec
16ch: 480 frames/sec
Record Quality Highest, Higher, High, Average, Low, Lower,
Lowest
Record Mode Schedule, Motion, Alarm, Motion or Alarm, Motion & Alarm, Command Trigger

Playback Mode 4 Channel PlaybackSimultaneously, Oause,
Stop, rewind, fast play, slow play, next file,
previous file, next camera, previous camera,
full screen, repeat, shuffle, backup selection
Overwrite Mode Support
Motion Detect Zones: 396 (22*18 detection zones Sensitivity: 1~6 (6 being Highest)
Trigger recording, PTZ movement, Tour Alarm
Privacy Masking Yes
View Tampering Yes
Network Function Internet Explorer and Client Software
Alarm 4,8,16 Alarm Inputs / 2-4 Relay Output
Back-up USB / Network
RS485 PTZ
HDD Interface 1 SATA port, 1 HDD supported
VGA Interface 1, Support 800~600/60Hz, 800~600/75Hz,
1024~768/60Hz

MECHANICAL
Video Inputs BNC female
Video Output BNC female
Monitor Output BNC female
Audio Inputs RCA female
Audio Output RCA female
Alarm Inputs Terminal Block
Alarm Outputs Terminal Block
RS485 Terminal Block
Network RJ-45 10M/100M UTP
VGA 9-pin D-sub female
RS-232 9-pin D-sub male
USB USB 2.0
IR Remote Controller Standard

ELECTRICAL
Power Requirements 100~240VAC, 6.3A, 50~60 HZ
Power Consumption 20W ~42W (without HDD)

ENVIRONMENTAL
Operating Temperature 14º to 131ºF (-10º to 55ºC)
Operating Humidity 10-90% RH Max.

PHYSICAL
Dimensions 14.25 in. 440(w) x 70(H) x 390(D)mm
Weight 13 lb (5.9 kg) approx. (without HDD)
Shipping Weight 19 lbs (8.6 kg) approx.

Visit Discounted CCTV for more information on the G4-HD-E DVR

Difference Between Replacement LED Bulb Tags for Light Emitting Diodes.

We're often asked to explain the difference between DOE's Lighting Facts^® label and the Lighting Facts label that will soon be required by the Federal Trade Commission (FTC). It's a good question, so we thought we'd take the opportunity to answer it in this Posting. 

The goal of both labels is to eliminate confusion and put everyone on the same page when it comes to evaluating lighting products. The two labels are intended to complement one another in what they cover. The FTC label applies only to medium screw-base light bulbs, and applies to all of them regardless of the technology; whereas the DOE label applies only to SSL products, and covers luminaires as well as replacement lamps. 

Another big difference is the target audience. The FTC label is aimed at consumers, whereas the DOE label targets retail buyers, utilities, and lighting professionals – i.e., people who already have a certain amount of lighting knowledge. And while the DOE label is purely voluntary, the FTC label is mandatory and must appear on the back of each package of medium screw-base light bulbs by January 1, 2012. After that date, DOE won't encourage the use of its own label on the packaging of SSL replacement bulbs, but when reviewing products, Lighting Facts partners can still rely on the verified information on the DOE label, which can be found on manufacturing specification sheets as well as at http://discountedled.com/. 

Although the two labels look somewhat similar, there are differences in their content. Both give the light output in lumens, the watts consumed, and the CCT as an indication of light color. The DOE label also indicates the efficacy (in lumens per watt) and the color accuracy (expressed as CRI), whereas the FTC label instead provides the estimated yearly energy cost, the mercury content (if any), and the lifetime (based on three hours of usage a day). 

We're often asked why lifetime isn't also included on the DOE label. The reason is that, at present, there's no standard method for predicting the lifetime of an LED lamp, so referencing lifetime on our Lighting Facts label would be contrary to the policy of requiring standardized testing. A working group under the joint auspices of DOE and the Next Generation Lighting Industry Alliance has been addressing this issue, and revised recommendations for measuring and reporting the lifetime of SSL luminaire products will soon be published. In parallel, standards groups with DOE involvement have been working on test methods. Together, this work will pave the way for including lifetime on our Lighting Facts label. 

As we've mentioned before, DOE's Lighting Facts program is about far more than just the label. Our Lighting Facts website offers a wide range of tools to help users evaluate SSL products. One of those tools is a Product Snapshot of LED replacement lamps, which uses data from the Lighting Facts product list – now numbering more than 2,900 products and growing all the time – to compare the performance of LED replacement lamps to standard technologies and the new efficiency levels called for by the Energy Independence and Security Act of 2007. The Product Snapshot is updated twice a year and, like all DOE Lighting Facts tools, is available online at no charge. 

The latest Product Snapshot, released in May, includes some findings that are worth noting. For example, the light output of LED replacement lamps has been rising steadily, with 800-lumen products – equivalent to 60W incandescents – beginning to appear on the Lighting Facts product list late last year. But many A-shape and reflector LED replacement lamps still don't meet the light output of high-wattage incandescents – and even when they do, many of these LED products fall short in terms of such metrics as CRI, CCT, and light distribution. In addition, many LED replacements for general-service fluorescent lamps have significantly lower light outputs than the products they're intended to replace, and also fall short in terms of efficacy. What all this means that SSL is still far from being a slam-dunk, and that any evaluation of LED products has to consider total performance, not just one or two parameters. 

The Product Snapshot also shows that because of their high purchase price – currently averaging around $40 – the payback for LED replacements of 60W incandescents is more than six years. Right now, CFLs can pay back in less than a year, saving more than $50 over the typical 10,000-hour life of the product. However, the price of LED replacement lamps continues to decrease very rapidly, and their payback times will before long become competitive with those of CFLs. Higher efficiency incandescent lamps, such as halogens, use nearly 30% less energy than their 60W low-efficiency incandescent counterparts, but still have roughly the same total cost of ownership due to their higher initial purchase price. 

With SSL developing so rapidly, it can be hard to sort through the profusion of LED lighting products on the market and make intelligent buying decisions. DOE's Lighting Facts program can help a lot in that regard. For more information, or to join, please visit Our Replacement LED Store

Home CCTV and Surveillance Systems

Many people think of CCTV surveillance as something that's reserved for big companies, for shops, and for high security areas such as maybe government buildings. However this need not be true, and in fact CCTV has many uses as well for the private home and many people can benefit from installing CCTV surveillance in their property.

The first reason you may want CCTV in your property is of course for security. Here, having CCTV surveillance allows you to keep an eye on your property and this way when someone approaches the house you will get advanced warning (for CCTV security positioned on the outside of the home that is). At the same time you can also have CCTV inside your property and this of course helps to protect your belongings while you're not there. This way, should someone break into your property, you can then aid the police by providing them with video evidence and this can help them to track down guilty parties and that will increase your chances of getting things back. If you have a home with any particularly valuable items then you can point your surveillance at those in order to protect them, and likewise if you work from home then you might want to place your CCTV within your personal office or study and this way you would be able to protect your documents and data too.

CCTV has more advantages though and can help keep you and your home safe in other ways. For instance the very fact that you have CCTV security will for many people be seen as a strong deterrent and thus even if the cameras don't record anything, they may be enough on their own to prevent people from breaking into your property in the first place. Something else to consider if you live in a friendly neighbourhood is that CCTV can also pick up things that are going on outside of your property in the local area. As mentioned earlier, the fact that CCTV is focussing on an area can mean that it helps to prevent people from committing crimes in the first place, and this way you can help to keep your whole neighbourhood safe and happy and contribute to your local community.

You can take your CCTV Surveilance Systems further for your home and there are many additional functions etc that you can utilise to give it more benefits for your home environment. For instance you can purchase IP CCTV Cameras which means 'Internet Protocol'. This then means that you can transmit your footage wirelessly and makes your cameras perfect for remote surveillance. If you're the kind of person then who goes on holiday but spends the whole time worrying about their home, then this is for you and will allow you to check the safety of your property from anywhere with an internet connection (you can even check on your cats/plants). Likewise, if your CCTV is digital it can use a motion sensor or video analysis and be tied into your alarm so that it goes off only when it picks up potential intruders.

More information can be found at this CCTV Equipment Supplier and his CCTV Surveillance Equipment Blog

Also, videos are coming to our CCTV Supllier Page on Youtube.

Utilizing Surveillance Equipment Correctly

When you put spy equipment and wireless cameras in your home, there are only a couple of things that you can do with it that will make it ethical. You should not use these cameras in order to spy on your family if you think they are doing something wrong. For example, do not use it to watch your husband if you think he is cheating on you. It would be better to talk with him in person about that. You can use it if you have contractors or other people in your house, such as nannies or maids. This will help make sure that nothing is stolen from your home. If it is, then you can easily fire the person who was stealing from you and press charges against them. This is the only situation that is necessary for you to use spy equipment and surveillance cameras in your home.

CCTV Equipment Information is constantly fluid and the technology updated often.

Surveillance Equipment | Remotely Monitoring Your Home

Using a home safety camera provides homeowners with harmony of thoughts about desired ones, pets, and personal property. Affordability and ease of designation make surroundings up a home safety camera something roughly any person can do.  Finding the proper CCTV Equipment Supplier is also highly important to ensure that your have the most effective Surveillance equipment available.

Why use a home safety camera? Using a home safety camera lets homeowners know what’s going on in their home, on their skill or in a surroundings involving desired ones, pets or property. Monitoring the activities of caregivers and service people, creation sure teenagers are where they’re ostensible to be and creation sure critical personal belongings aren’t worried are a few of the reasons to setup a home safety camera.

Nanny cams, as they were called, were the initial affordable chronicle of a home safety camera. Technology has advanced, enhancing the images prisoner with nanny cams and stepping up options for use. This sort of home safety camera sends images to a bottom hire for observation around unit phone, P.C. or television. While tiny and easy to use, wireless nanny cameras may not add encryption. Unencrypted wireless signals can simply be hacked by others.

Using a home safety camera to guard desired ones is nothing new. Nanny cams have been around for a few time, capturing what unequivocally goes in when parents aren’t home. Infants and young kids are not the usually reason to use a home safety camera. Many people are receiving caring of aging parents and sick desired ones. With a camera recording all activity, viewers can ensure caregivers are accountable and patients are comfortable.

Pet owners find using a home safety camera a elementary and cheap way to keep an eye on dear pets. Not usually can they ensure pets aren’t getting in to something harmful, they can moreover ensure pets aren’t sufficient for you name was quoted as adage without being spoiled by others.
Homeowners can use a home safety camera to guard any segment of home or home business. If animals or equipment are housed in outbuildings, notice equipment may be employed to guard the area.

Choosing a home safety camera is a matter of need and budget. For monitoring tiny or cramped areas, the nanny cam or elementary web cam is frequently adequate. They’re low cost and easy to conseal if secret notice is required.  A strong CCTV Supplier and Surveillance Equipment Distributor will make finding proper equipment a breeze.

When it’s vital to guard more area such as the whole home, kits are available. Homeowners select the pack many apt is to plan and notice needs. Wired and wireless home safety cameras are available.

Installing a connected home safety camera is simpler when initial office building the home or when remodeling. Using wireless technology eliminates the need for wiring. Many homeowners are already using wireless P.C. connections. A wireless home safety camera operates the same way. Images are sent around signals by the wireless network. Advances in wireless safety make safeguarding wireless networks simpler and more efficient.

The typical home safety camera sends images to the radio or a computer. New technology allows the home safety camera user to guard images from wherever there is an internet or unit phone connection.

Home safety cameras capacitate users to sustain and safeguard skill whilst progressing their standard and traditional lifestyle.

Christian Lamar

Christian Lamar is a person with many different listings. One Christian Lamar is from Atlanta. The other Christian Lamar is in Maryland. yet another in Pennsylvania

This Christian Lamar lives in California

Christian Lamar is the Deputy Director for Litigation at the Georgia Capital Defender in Atlanta, Georgia.

You can also find more people named Christian Lamar here

 

And yet, another Christian Lamar is and artist

CCTV Equipment Supplier | CCTV BNC to RCA CCTV Equipment

Discounted CCTV has the best prices on CCTV Equipment. They offer IP CCTV Cameras and BNC to RCA as well as RCA to BNC connectors.

We offer full CCTV DVR Systems and a large selection on IR CCTV Cameras.

Please feel free to follow us on our CCTV Twitter Page and become a fan on our CCTV Fan Page

CCTV Equipment Supplier